DescriptionXChem Pro C601 Capsule VZ-P – Epoxy-Acrylate / HEC XChem ProThe C601 VZ-P Capsule from HEC XChem Pro is a pre-packaged epoxy-acrylate resin system for reliable, high-load anchoring in concrete and solid masonry. Each capsule contains a two-component formulation that provides controlled mixing during anchor installation. Designed for both structural and seismic applications, the C601 system is AS 5216 compliant and suitable for demanding environments requiring long-term durability.ApplicationsHigh-strength anchoring of threaded rods and reinforcing bars in concreteSeismic C1 and fire-rated anchoring applicationsIdeal for industrial, civil, and structural construction projectsUsed with wide-square U-bolts or studs in pre-drilled holesFeaturesStyrene-free epoxy-acrylate formulationHigh bond strength and excellent performance in concreteSingle capsule per hole simplifies installation and ensures correct dosageAS 5216 compliant, ETA certified, seismic C1 rated, and fire testedSuitable for potable water and LEED tested for low VOCLong shelf life and consistent curing performanceSpecificationsPartQFindDiameterLength (mm)Pack QtyMCCC601-08C60108M88510MCCC601-10C60110M109010MCCC601-12C60112M129510MCCC601-16C60116M169510MCCC601-20C60120M2014510MCCC601-24C60124M241905Compliance & RatingsAS 5216 CompliantETA CertifiedSeismic C1 RatedFire RatedVOC/IAQ Grade – Potable Water ApprovedLEED TestedInstallationDrill hole to the correct diameter and depth for the anchor size.Clean the hole thoroughly (blow, brush, blow) to remove dust and debris.Insert the capsule into the hole.Using a rotary hammer drill, spin the threaded rod or rebar into the capsule until fully seated.Allow the resin to cure fully before applying load.Refer to the HEC XChem Pro technical data sheet for detailed curing times, load capacities, and installation parameters.
